Difference between revisions of "Ooh323.conf"

From TD-er's Wiki
Jump to navigationJump to search
m
 
m
 
Line 4: Line 4:
 
Here is our ooh323.conf:
 
Here is our ooh323.conf:
  
−
 
+
; Objective System's H323 Configuration example for Asterisk
−
  FINALE VERSIE KOMT HIER
+
  ; ooh323c driver configuration
−
 
+
;
−
 
+
; [general] section defines global parameters
 +
;
 +
; This is followed by profiles which can be of three types - user/peer/friend
 +
; Name of the user profile should match with the h323id of the user device.
 +
; For peer/friend profiles, host ip address must be provided as "dynamic" is
 +
; not supported as of now.
 +
;
 +
; Syntax for specifying a H323 device in extensions.conf is
 +
; For Registered peers/friends profiles:
 +
;        OOH323/name where name is the name of the peer/friend profile.
 +
;
 +
; For unregistered H.323 phones:
 +
;        OOH323/ip[:port] OR if gk is used OOH323/alias where alias can be any H323
 +
;                          alias
 +
;
 +
; For dialing into another asterisk peer at a specific exten
 +
;      OOH323/exten/peer OR OOH323/exten@ip
 +
;
 +
; Domain name resolution is not yet supported.
 +
;
 +
; When a H.323 user calls into asterisk, his H323ID is matched with the profile
 +
; name and context is determined to route the call
 +
;
 +
; The channel driver will register all global aliases and aliases defined in
 +
; peer profiles with the gatekeeper, if one exists. So, that when someone
 +
; outside our pbx (non-user) calls an extension, gatekeeper will route that
 +
; call to our asterisk box, from where it will be routed as per dial plan.
 +
 +
 +
[general]
 +
;Define the asetrisk server h323 endpoint
 +
 +
;The port asterisk should listen for incoming H323 connections.
 +
;Default - 1720
 +
;port=1720
 +
 +
;The dotted IP address asterisk should listen on for incoming H323
 +
;connections
 +
;Default - tries to find out local ip address on it's own
 +
bindaddr=0.0.0.0   
 +
 +
;This parameter indicates whether channel driver should register with
 +
;gatekeeper as a gateway or an endpoint.
 +
;Default - no
 +
;gateway=no
 +
 +
;Whether asterisk should use fast-start and tunneling for H323 connections.
 +
;Default - yes
 +
;faststart=no
 +
;h245tunneling=no
 +
 +
 +
;H323-ID to be used for asterisk server
 +
;Default - Asterisk PBX
 +
h323id=ObjSysAsterisk
 +
e164=100
 +
 +
;CallerID to use for calls
 +
;Default - Same as h323id
 +
callerid=asterisk
 +
 +
;Whether this asterisk server will use gatekeeper.
 +
;Default - DISABLE
 +
;gatekeeper = DISCOVER
 +
;gatekeeper = a.b.c.d
 +
;CHANGED
 +
;gatekeeper = DISABLE
 +
gatekeeper = 129.125.71.171
 +
 +
;Location for H323 log file
 +
;Default - /var/log/asterisk/h323_log
 +
;logfile=/var/log/asterisk/h323_log
 +
 +
 +
;Following values apply to all users/peers/friends defined below, unless
 +
;overridden within their client definition
 +
 +
;Sets default context all clients will be placed in.
 +
;Default - default
 +
context=default
 +
 +
;Sets rtptimeout for all clients, unless overridden
 +
;Default - 60 seconds
 +
;rtptimeout=60     ; Terminate call if 60 seconds of no RTP activity
 +
                    ; when we're not on hold
 +
 +
;Type of Service
 +
;Default - none (lowdelay, thoughput, reliability, mincost, none)
 +
;tos=lowdelay
 +
 +
;amaflags = default
 +
 +
;The account code used by default for all clients.
 +
;accountcode=h3230101
 +
 +
;The codecs to be used for all clients.Only ulaw and gsm supported as of now.
 +
;Default - ulaw
 +
; ONLY ulaw, gsm, g729 and g7231 supported as of now
 +
disallow=all    ;Note order of disallow/allow is important.
 +
allow=gsm
 +
allow=ulaw
 +
 +
 +
; dtmf mode to be used by default for all clients. Supports rfc2833, q931keypad
 +
; h245alphanumeric, h245signal.
 +
;Default - rfc 2833
 +
dtmfmode=rfc2833
 +
 +
; User/peer/friend definitions:
 +
; User config options                    Peer config options
 +
; ------------------                    -------------------
 +
; context                           
 +
; disallow                              disallow
 +
; allow                                  allow
 +
; accountcode                            accountcode
 +
; amaflags                              amaflags
 +
; dtmfmode                              dtmfmode
 +
; rtptimeout                            ip
 +
;                                        port
 +
;                                        h323id
 +
;                                        email
 +
;                                        url
 +
;                                        e164
 +
;                                        rtptimeout
 +
 +
;
 +
 +
;Define users here
 +
;Section header is extension
 +
[myuser1]
 +
type=user
 +
context=context1
 +
disallow=all
 +
allow=gsm
 +
allow=ulaw   
 +
 +
 +
 +
[mypeer1]
 +
type=peer
 +
context=context2
 +
ip=a.b.c.d  ; UPDATE with appropriate ip address
 +
port=1720    ; UPDATE with appropriate port
 +
e164=101
 +
 +
 +
 +
[myfriend1]
 +
type=friend
 +
context=default
 +
ip=10.0.0.82  ; UPDATE with appropriate ip address
 +
port=1820    ; UPDATE with appropriate port
 +
disallow=all
 +
allow=ulaw
 +
e164=12345
 +
rtptimeout=60
 +
dtmfmode=rfc2833
 +
 
Comments on this file:
 
Comments on this file:
−
* All parameters that have been changed by us are preceded with a comment line ''';CHANGED'''
+
* All parameters that have been changed by us are preceded with a comment line ''';CHANGED'''. Right now this is only the gatekeeper parameter.
−
* The Trixbox is going to act as gateway for the gatekeeper hence '''gateway = yes'''
+
* To make H323 -> SIP calls the Trixbox probably has to act as gateway for the gatekeeper hence '''gateway = yes''' might be set later.
−
* h245tunneling = yes (Later our trixbox forum instructor suggested h245tunneling = no. Some people have yes, some have no. It did not change anything for us at this point but this might be an important parameter)
+
* h245tunneling is an option that some people have changed. Right now it does not make a difference but this is a parameter that might make a difference in a later stage.
−
* For some reason it seems that you have to set e164 to the SIP extension number ??? (how to handle multiple extension???) (not true anymore ?)
 
 
* We will be using a gatekeeper so '''gatekeeper = 129.125.71.171''' (ip-address of the gatekeeper)
 
* We will be using a gatekeeper so '''gatekeeper = 129.125.71.171''' (ip-address of the gatekeeper)

Latest revision as of 15:23, 8 March 2007

Next thing was to edit the ooh323.conf file. This file needs to be copied from the samples first: 

cp /etc/asterisk-1.2.8-samples/ooh323.conf /etc/asterisk

Here is our ooh323.conf:

Objective System's H323 Configuration example for Asterisk
; ooh323c driver configuration
;
; [general] section defines global parameters
;
; This is followed by profiles which can be of three types - user/peer/friend
; Name of the user profile should match with the h323id of the user device.
; For peer/friend profiles, host ip address must be provided as "dynamic" is
; not supported as of now.
;
; Syntax for specifying a H323 device in extensions.conf is
; For Registered peers/friends profiles:
;        OOH323/name where name is the name of the peer/friend profile.
;
; For unregistered H.323 phones:
;        OOH323/ip[:port] OR if gk is used OOH323/alias where alias can be any H323
;                          alias
;
; For dialing into another asterisk peer at a specific exten
;       OOH323/exten/peer OR OOH323/exten@ip
;
; Domain name resolution is not yet supported.
; 
; When a H.323 user calls into asterisk, his H323ID is matched with the profile
; name and context is determined to route the call
;
; The channel driver will register all global aliases and aliases defined in 
; peer profiles with the gatekeeper, if one exists. So, that when someone
; outside our pbx (non-user) calls an extension, gatekeeper will route that 
; call to our asterisk box, from where it will be routed as per dial plan.


[general]
;Define the asetrisk server h323 endpoint

;The port asterisk should listen for incoming H323 connections.
;Default - 1720
;port=1720

;The dotted IP address asterisk should listen on for incoming H323
;connections
;Default - tries to find out local ip address on it's own
bindaddr=0.0.0.0    

;This parameter indicates whether channel driver should register with 
;gatekeeper as a gateway or an endpoint.
;Default - no
;gateway=no

;Whether asterisk should use fast-start and tunneling for H323 connections.
;Default - yes
;faststart=no
;h245tunneling=no


;H323-ID to be used for asterisk server
;Default - Asterisk PBX
h323id=ObjSysAsterisk 
e164=100

;CallerID to use for calls
;Default - Same as h323id
callerid=asterisk

;Whether this asterisk server will use gatekeeper.
;Default - DISABLE
;gatekeeper = DISCOVER
;gatekeeper = a.b.c.d
;CHANGED
;gatekeeper = DISABLE
gatekeeper = 129.125.71.171

;Location for H323 log file
;Default - /var/log/asterisk/h323_log
;logfile=/var/log/asterisk/h323_log


;Following values apply to all users/peers/friends defined below, unless
;overridden within their client definition

;Sets default context all clients will be placed in.
;Default - default
context=default

;Sets rtptimeout for all clients, unless overridden
;Default - 60 seconds
;rtptimeout=60	    ; Terminate call if 60 seconds of no RTP activity
                    ; when we're not on hold

;Type of Service
;Default - none (lowdelay, thoughput, reliability, mincost, none)
;tos=lowdelay

;amaflags = default

;The account code used by default for all clients.
;accountcode=h3230101

;The codecs to be used for all clients.Only ulaw and gsm supported as of now.
;Default - ulaw
; ONLY ulaw, gsm, g729 and g7231 supported as of now
disallow=all     ;Note order of disallow/allow is important.
allow=gsm
allow=ulaw


; dtmf mode to be used by default for all clients. Supports rfc2833, q931keypad
; h245alphanumeric, h245signal.
;Default - rfc 2833
dtmfmode=rfc2833

; User/peer/friend definitions:
; User config options                    Peer config options
; ------------------                     -------------------
; context                            
; disallow                               disallow
; allow                                  allow
; accountcode                            accountcode
; amaflags                               amaflags
; dtmfmode                               dtmfmode
; rtptimeout                             ip
;                                        port
;                                        h323id
;                                        email
;                                        url
;                                        e164
;                                        rtptimeout

;

;Define users here
;Section header is extension
[myuser1]
type=user
context=context1
disallow=all
allow=gsm
allow=ulaw    



[mypeer1]
type=peer
context=context2
ip=a.b.c.d   ; UPDATE with appropriate ip address
port=1720    ; UPDATE with appropriate port
e164=101



[myfriend1]
type=friend
context=default
ip=10.0.0.82   ; UPDATE with appropriate ip address
port=1820    ; UPDATE with appropriate port
disallow=all
allow=ulaw
e164=12345
rtptimeout=60
dtmfmode=rfc2833

Comments on this file:

  • All parameters that have been changed by us are preceded with a comment line ;CHANGED. Right now this is only the gatekeeper parameter.
  • To make H323 -> SIP calls the Trixbox probably has to act as gateway for the gatekeeper hence gateway = yes might be set later.
  • h245tunneling is an option that some people have changed. Right now it does not make a difference but this is a parameter that might make a difference in a later stage.
  • We will be using a gatekeeper so gatekeeper = 129.125.71.171 (ip-address of the gatekeeper)
Retrieved from "https://wiki.td-er.nl/index.php?title=Ooh323.conf&oldid=2297"