View source for Configuration of Trixbox 1.2.3

We followed mostly the instructions from these two forums on the [http://www.trixbox.org/ Trixbox] site:
* [http://www.trixbox.org/modules/newbb/viewtopic.php?viewmode=flat&order=ASC&topic_id=2865&forum=6 here is the working configuration & tips for oh323]
* [http://www.trixbox.org/modules/newbb/viewtopic.php?topic_id=3228&forum=2#forumpost41741 H323, SIP and Gatekeeper]

There are more forums where people say things about h323 but these seem to be the most helpful. 

Following the suggestions we used Trixbox 1.2.3 with asterisk-addons-1.2.3. In order to do this we deleted the current addons:

 rpm -qa | grep asterisk-addons
 rpm -e asterisk-addons-1.2.4_1.2.12.1-1.294

And loaded the older addons: (these can be found ...............)

 rpm -i asterisk-addons-1.2.3-1.219.i386.rpm

If this is really necessary we can't tell right now. Once you get everything working it might be worth trying it without these add-ons. 

Whenever you edit anyting in the .conf files makes sure to afterwards do
 amportal stop
 amportal start

at you asterisk prompt. If you then do 
 asterisk -vvvvr
you get an CLI and here you can type
 ooh323 debug
 sip debug
 exit
to initiate the debugger

Only ooh323.conf needs manual configuration:
[[ooh323.conf]]

[[Adding H323 extensions]]