HOWTO SET UP TRIXBOX AS H323 GATEWAY

From TD-er's Wiki
Revision as of 12:39, 12 March 2007 by Anneke (talk | contribs)
Jump to navigationJump to search
  • Start you gatekeeper. For Gnugk do
gnugk -ttt -rr
  • Start asterisk
  • Make sure the file ooh323.conf is present in /etc/asterisk
  • In ooh323.conf you have to change:
gatekeeper = xxx.xxx.xxx.xxx (ip address of your gatekeeper)

In FreePBX -> Setup -> Extensions:

  • Create a SIP extension (e.g. extension 501)
  • Create a Custom extension with dialstring
Extension number: 601
Displayname: Anneke h323
Dial: OOH323/601@129.125.71.172 (ip-address of machine where extension can be found)

(Asterisk saves these extensions in the file extensions_additional.conf in the [ext-local] context).

  • At asterisk prompt
amportal stop
amportal start

Your gatekeeper should produce output telling you that ObjSysAsterisk is registering.

  • Open your X-lite and configure it like you always would
  • Open Gnomemeeting:
  • Goto Edit -> Preferences -> H323 settings -> Gatekeeper settings
Registering method: Gatekeeper host
Gatekeeper host: xxx.xxx.xxx.xxx (ip address of your gatekeeper)
Gatekeeper alias: 601 (number of your h323 extension as you registered it in FreePBX)
Check: register this alias as the primary alias with the gatekeeper
Click on Apply

Your gatekeeper should produce output telling you that extension 601 is registering.