DUNDi configuration

From TD-er's Wiki
Revision as of 11:41, 27 February 2007 by Gijs (talk | contribs)
Jump to navigationJump to search

In order to keep our config files clean, we edited the *_custom.conf files, where possible.

Configuring DUNDi

For making DUNDi work, you have to edit three Asterisk configuration files. The three files are dundi.conf, iax.conf, and extensions.conf. These are in /etc/asterisk/ on the Trixbox.

  • dundi.conf controls peer authentication.
  • iax.conf is our transport protocol.
  • extensions.conf contains your dialplans.

This example connects three peers, PBX1 , PBX2 and PBX3.

First edit iax.conf. Add the following lines, except for any that are duplicated in the [general] section:

[koekje]
type=user
dbsecret=dundi/secret ; the password used by others to make an IAX connection to this machine.
context=from-internal ; this context must not be changed when using Trixbox.
regcontext=d_adv      ; used for registration of connected phones.
disallow=all
allow=ulaw
allow=alaw
allow=gsm

Now edit dundi.conf. The default file is well commented and has lots of examples--you'll find definitions of all the directives in there. This is where your mapping contexts are defined, which follow this format:

dundi_context => local_context,weight,technology,destination,[options]

The following configuration creates two DUNDi mapping contexts:

[general]
port=4520
entityid=00:0C:29:97:0B:98 ; This is the mac address of eth0
cachetime=5
ttl=32
autokill=yes
secretpath=dundi
department=Rubzzzz
organization=Rubzzzz, Inc.
locality=Stad
stateprov=Gr
country=NL
email=your@email.com
phone=+12565551212
[mappings]
priv => dundi-priv-local-custom,0,IAX2,koekje:${SECRET}@192.168.1.101/${NUMBER},nounsolicited,nocomunsolicit,nopartial
[00:0C:29:A7:E0:73] ; MAC address of TrixBox2 eth0
model = symmetric
host = 192.168.1.103
inkey = dundi
outkey = dundi
include = priv
permit = priv
qualify = yes
dynamic=yes
;[00:0C:29:D2:D8:EC] ; MAC address of TrixBox3 eth0
;model = symmetric
;host = 192.168.1.106
;inkey = dundi
;outkey = dundi
;include = priv
;permit = priv
;qualify = yes
;dynamic=yes

You need to create RSA authentication keys for your server. You may name them anything you want; a good naming convention is to use your server's fully-qualified domain name. Create keys with these commands:

# cd /var/lib/asterisk/keys
# /usr/sbin/astgenkey -n myhost.mynet.com

This creates two keys: myhost.mynet.com.pub and myhost.mynet.com.key. The public key, myhost.mynet.com.pub, must be distributed to all servers you are peering with. Post it on your Web site if you like. The private key is unencrypted, and like all private encryption keys must be guarded carefully. Then the res_crypto.so line interface:

# asterisk -r
asterisk1*CLI># reload res_crypto.so
asterisk1*CLI># reload pbx_dundi.so

From here you can also run the command show keys to see all of your RSA keys. Now go back to iax.conf and add the dundi user.

Here is a quick Linux tip: you don't have to exit the Asterisk CLI to return to the Linux command line. If you're logging in remotely, just open a second SSH session. If you're on the Asterisk server, switch to a second console with Alt+F2.

This allows remote access to your server:

[dundi]
 type=user
 dbsecret=dundi/secret
 context=dundi-priv-local
 disallow=all
 allow=ulaw
 allow=g726

dundi/secret is an encryption key automatically generated by Asterisk. You may view this key by running the database show command from the Asterisk CLI.

Finally, edit extensions.conf; this is where you define what numbers to share and what to do with them. Telephone numbers must follow this format:

country_code area_code prefix number

This is a simple example that answers incoming calls, directs them via the SIP protocol to extension 200, which is the digital assistant, sends the caller to voicemail if there is no answer, then hangs up.

[dundi-priv-local]
 exten => 15035551212,1,Answer( )
 exten => 15035551212,n(call),Dial(SIP/200)
 exten => 15035551212,n,Voicemail(u200)
 exten => 15035551212,n,Hangup( )






SIP registration

Add the following to sip.conf:

regcontext=sipregistration

Once the phones, in this example 201 and 202 register with the PBX, a context of [sipregistration] appears and can be shown in the Asterisk CLI:

asterisk1*CLI> show dialplan sipregistration
[ Context 'sipregistration' created by 'SIP' ]
  '201' =>          1. Noop(201)                                  [SIP]
  '202' =>          1. Noop(202)                                  [SIP]
-= 2 extensions (2 priorities) in 1 context. =-


DUNDi CLI-checks

  • dundi lookup:
asterisk1*CLI> dundi lookup 301@priv bypass
  1.     0 IAX2/priv:ByWFbOGKgGmZbM43BJHSZw@2.4tw.nl/301 (EXISTS)
     from 00:0c:29:d2:d8:ec, expires in 3600 s
DUNDi lookup completed in 113 ms
asterisk1*CLI> dundi lookup 202@priv
  1.     0 IAX2/priv:+DmRAz4RjwF6GQMC3zopfQ@1.4tw.nl/202 (EXISTS)
     from 00:0c:29:e4:14:80, expires in 3570 s
DUNDi lookup completed in 13 ms


Alternatives to DUNDi

You can also try the TDMoE zaptel driver. This is similar to the ztdummy driver in some ways but it will link 2 or more PBX's on the same physical network with zap channels. So on a 100Mb ethernet interface you could potentially get the equivalent of about 50 PRI lines. Overkill maybe, but you can set the number of channels you want. This should be good for interconnecting a voicemail only Trixbox with another tribox handling the calls. In larger installs this would be useful as it offloads the voicemail agi scripts and transcoding to another box. TDMoE is also much simpler to configure in comparison to DUNDI.

you get many of the same features as you do with normal zap channels. It is also very efficient on bandwidth and cpu.

DUNDI is a good solution for remote PBX's. (Source)